Stereoscopy is not displayed correctly
This article is only about Active-Stereoscopy. Read this other article: "Troubleshooting passive / side-by-side stereoscopy".
Here is more information about the different types of stereoscopy: "Understanding Stereoscopy".
- The screen displays a uniform color (white, purple, black …).
- When looking through the 3D glasses, stereoscopy is not perceived correctly.
- The VR system is not configured properly to display a stereoscopic image
- To test the stereoscopy, run C:\Program Files\MiddleVR\bin64\oglplane.exe. This application is the simplest OpenGL stereo there is, it does not have any MiddleVR involved. If this application doesn't work, it means there is a problem with the system's configuration (Windows / Nvidia / Projector ) and MiddleVR's stereo will not work either.
- Make sure your NVidia card is correctly configured to display a 3D image:
- Make sure that "Stereo - Enable" is "On" in the NVidia control panel: 3D Settings --> Manage 3D Settings --> Global Settings --> Stereo - Enable
- Make sure that "Stereo - Display mode" is correctly set to your system mode.
- Make sure “3D display mode” is set to “On” in Windows settings: Settings --> Display --> Advanced Display Settings.
- Make sure OpenGL is turned on: <nvidia control panel> --> Manage 3D Settings --> Global Settings --> OpenGL rendering GPU --> <choose your graphics cards>
- Check that 3D Vision is disabled: Active Stereoscopy and Nvidia 3DVision. (this seems to be less true with Windows 8 and Windows 10, which seem to require on some setup that 3D Vision is enabled.)
- Uninstall "NVidia 3D Vision" and "NVidia 3D Vision controler" drivers
- In “Change resolution” panel, make sure the selected resolution is in the “PC” category and not the “3DTV” category.
- Make sure your display is correctly configured to display a 3D image. If you are getting anything less than 60hz (ideally you need 120hz), the system configuration is probably wrong. For example a 24hz refresh rate is indicative of a 3DTV refresh rate. It would indicate the 3d mode is the 3dtv mode, not the sequential frame buffer of the regular stereoscopy which should put the projectors in 120hz mode. MiddleVR doesn't support the "frame-packed" stereo of 3DTVs, only Side-by-Side mode.
- Make sure to disable any remote viewing software like VNC, TeamViewer etc.
- Your graphics drivers can be in a corrupted configuration. See article “Reinstall the graphics drivers”.
- If your screen orientation is rotated (for example in portrait mode) in the NVidia control panel, stereoscopy will be disabled by NVidia. You should change the screen orientation to default and rotate the corresponding Screens in the MiddleVR configuration.
- You can't have a stereoscopic window (OGLPlane or MiddleVR) across multiple GPUs without Mosaic. If you are testing this, make sure the window only spans on one GPU (i.e. the window only covers DVI/VGA/HDMI output that go out from one graphics card).
- Do you have any other app that works with this configuration ?
Here are some steps to help trouble shoot Mosaic:
1/ deactivate Mosaic, try OGLPlane on just one GPU
2/ if this works, test MiddleVR on just one GPU
3/ enable Mosaic and try OGLPlane
4/ if this works, test MiddleVR on all GPUs
NVidia Quadro Sync
In some very rare cases, it is advised to upgrade the firmware of the NVidia Quadro Sync so that all of the Quadro Sync cards have the same firmware version.
- If Ashampoo Snap 6 (for screenshot and editing) is installed, and this application is running in background, active stereoscopy won’t work. In order to fix stereo, you have to quit the screenshot application.